SPAL ACCESSORIES

Automatic Programmable Fan Controller VER 3

Automatic Programmable Fan Controller VER 3

FAN-PWM-V3 / Programmable Electric Fan Controller

SPAL's all new programmable fan controller allows you to vary the speed of a single SPAL cooling fan based on engine temperature. This results in increased fan life and reduced operational noise.

You simply choose the Low and High temperature settings you desire. When the low temperature setting is reached the fan begins spinning at 50% speed. As the engine temperature increases, the speed of the fan slowly increases until it reaches the High setting, where it is then running at 100%.

The system can operate dual fan setups with the ability to trigger an external fan relay to power your second fan. An input for your air conditioning system allows fans to run at 100% when the A/C is activated. Built in timing features keep fans off during modern vehicle defrost cycles. On board status indicator lights report error codes and let you know the FAN-PWM-V3 is active and ready.

Many new additional features including fan status output for in vehicle verification of fan operation, over current protection and smart soft start for lower inrush spikes from the fan system just to name a few.

PLEASE NOTE THE FOLLOWING: The FAN-PWM-V3 is not intended for use with fans that draw more current than 30amps continuously. This includes (but not limited to) SPAL extreme performance fans, Ford Taurus fans and Mark VIII fans. THE SPAL FAN-PWM-V3 IS INTENDED TO BE ONLY USED WITH SPAL FANS.

$144.95

AN-PWM-TSWeight: .1 lbs.Temperature Sensor for the FAN-PWM This sensor works only with the FAN-PWM-V3.
- It cannot be used with the FRH.
- 3/8-inch NPT thread
- Waterproof connector

$29.95

FREE SHIPPING!

In the Continental US (Alaska,Hawaii & International orders extra shipping charges will apply.)

FRH

FAN RELAY HARNESS

Fan Relay Harness

A SPAL fan relay wiring kits are a must-have when installing an electric fan. Safely integrates with OEM wiring.

$37.95

185FH Fan Harness Kit

SPAL relay wiring kits are a must-have when installing an electric fan. Designed to safely integrate with OEM wiring our kits feature a waterproof 10/40 Amp relay along with printed wires which aid in installation.

SPAL kits feature 3/8" NPT (National Pipe Thread) and stainless steel switches with optional switched override capability. Kits are available with or without thermoswitch. 1/2" adapter is included.

$49.95

185 Fan Harness

185FH Fan Harness Kit

$49.95

VA33-AP71/LL-65A Fan (16" HP)

16" Paddle Blade High Performance Fan /
12V Puller

SPAL'S High Performance 16" fan line is the best of the best! This is a popular primary fan for the street rod enthusiast. But is not recommended by SPAL for use in conjunction with the SPAL FAN - PWM - V3 . It is available in curved blade design for reduced noise and feature fully sealed waterproof/dustproof motors. Each fan is individually balanced for long life.
PART # 30102082 Weight: 6.25 lbs.

$152.95

VA18-AP71/LL-59A Fan (16" HP Curved Blade)

16" Curved Blade High Performance Fan /
12V Puller

SPAL'S High Performance 16" fan line is the best of the best! This is by far our most popular primary fan sold to the street rod enthusiast it is compatible with the SPAL FAN _ PWM _ V3 . It is available in curved blade design for reduced noise and feature fully sealed waterproof/dustproof motors. Each fan is individually balanced for long life.
PART # 30102049 Weight: 5.75 lbs.

$144.95

VA08-AP71/LL-53A (14" HP Curved Blade)

14" Curved Blade High Performance Fan /
12V Puller

Our most poplar fan design offers the highest performance on the market today! A street rodder's dream -- high airflow for low clearance applications. Used as primary cooling fans for many makes and models of today's automobiles. A curved blade design is available for reduced noise. Featuring fully sealed waterproof/dustproof motors, each fan is individually balanced for long life.
PART # 30102042 Weight: 5.25 lbs.

$144.95